How to Use SP Flash Tool

These are the instructions to Flash firmware flash file Stock Rom or any custom rom using Smart Phone Flash Tool (SP Flash Tool) on any Windows Computer.

Requirements: Your Android Smartphone should have at least 40-50 percent of Battery to perform the Flashing Process.

Flash Firmware Stock Rom using Smart Phone Flash Tool (SP Flash Tool)

Step 1: Download and install Android Smartphone USB Driver on your Computer. If Android Smartphone USB Drivers are already installed on your Computer, skip this step.

Step 2: Power Off your Android Smartphone and remove the Battery (if it is removable).

Step 3: Download the Firmware Stock Rom or Custom Rom that you want to Flash on your Android Smartphone and extract it on your Computer.

Step 4: Download and Extract Android Smart Phone Flash Tool on Your Computer. After Extracting, you will be able to see the following files:

SP Flash Tool


Step 5: Now Open Flash_tool.exe (you will find this from the extracted files in Step#4).

Step 6: Once the Smart Phone Flash Tool is launched, Click on the Download Tab.

Step 7: Now click on the scatter-loading button in the Download Tab.


Step 8: Now, Locate the Scatter File (you will find the scatter file in the Firmware folder).

Step 9: Now, Click on the Download Button to begin the Flashing Process.

Step 10: Now, Connect your Android Smartphone to the Computer using USB Cable (without Battery- if it is removable). After connecting the device to the Computer, Press Volume Down or Volume Up key so that your computer easily detect your android smartphone

Step 11: Once Flashing is completed, a Green Ring will appear.

Step 12: Close the Smart Phone Flash Tool on your Computer and disconnect your Android Smartphone from the Computer.

How do you download SP Flash Tool?

Just the download link & button is given below. The file will be downloaded only when you touch it—download SP Flash Tool with 100% download speed from google drive.

Download Now


Leave a Reply

Your email address will not be published. Required fields are marked *