The TFM Tool Pro SPD Setup File is a tool specially developed for Spreadturm chip devices. It helps unlock the FRP lock and password pin lock, reset screen locks, fix the IMEI issue, etc.
Here, you can get the download link for the latest version of the TFM Tool Pro SPD module tool, including all the old versions. Also, we have provided instructions on how to use it.
Features
- You can erase all data and settings from your SPD device.
- Remove the FRP lock.
- User-friendly interface.
- Read-Write Services.
- Read the info.
- You can network-unlock your device.
- loads a PAC firmware file onto your device.
- You can repair the IMEI on your device.
- You can unlock bootloaders.
- Remove the MDM lock.
- Supported Auth-Free Models.
How to download TFM Tool Pro SPD’s latest version
We suggest you download the latest version of the tool for better stability. You can download the latest version of the TFM Tool Pro SPD using the G-Drive and MEGA buttons below. Simply click on the button that you want to download.
| File Name: | TFM Tool Pro SPD V1.9.0.zip |
|---|---|
| File Size: | 18 MB |
| Version: | v1.9.0 Latest |
| Platform: | Windows (32-bit or 64-bit) |
| Old Version | LINK: 1 | LINK: 2 |
|---|---|---|
| v1.8.0 | Direct | G Drive |
| v1.7.3 | M-Fire | G Drive |
| v1.7.1 | M-Fire | G Drive |
| v1.6.2 | M-Fire | G Drive |
| v1.6.0 | AFH | G Drive |
| v1.5.0 | AFH | G Drive |
| v1.3.0 | AFH | G Drive |
| v1.2.0 | AFH | G Drive |
| v1.0.0 B19 | AFH | G Drive |
How to use the TFM Tool Pro SPD
- First, download the TFM Tool Pro SPD module tool on your computer.
- Then install it.
- Now you must download and install the SPD USB driver on your computer.
- If you want to write firmware on your device:
First, open the tool. Then go to the Flash tab. Now select the firmware. Click on the flash button. Connect your device to Flash Mode. - If you want to reset the FRP lock on your device:
Open the tool. Then Go to the Service tab. Click on Reset FRP. Connect your device to Flash Mode. - If you want to reset the Reset Screen Locks on your device:
Open the tool. Then Go to the FRP tab. Click on Format FS. Connect your device to Flash Mode.
Warning
Before flashing the device, back up your important data. Ensure your device has enough charge. If your device turns off during a flash, chances are the device is dead.
The TFM Tool Pro SPD Setup File is easy to use, but if you are an expert, it will be easier to do this work, and experts should do this work.
Notes
Virus Status: Before uploading this tool, we checked it with Kaspersky Antivirus, so don’t worry about it.
USB Driver: If you need an SPD USB driver, please check out our latest SPD USB driver.
Firmware: For any Firmware, please visit the official Firmware.
More tools: If you need more SPD tools, then download the CM2 SPD, CM2SP2, and Avenger SPD.
