Best Flash File

CM2 SP2 Setup File v2.14 – (all versions)

CM2 SP2

The CM2 SP2 Module Tool setup file is used to flash stock ROMs on Spreadtrum SOC chipset phones. Moreover, FRP locks, screen locks, privacy locks, and invalid IMEI problems are solved with it.

On this page, you can get the latest versions of the CM2 SP2 tool setup file and all the old versions. Also, we have provided instructions on how to use it.

Features

This CM2 SP2 has a lot of features. Some key features are:

  • You can perform security repairs on your device.
  • Permanent lock issues can also be fixed.
  • You can repair your device in Diag mode.
  • Supports new devices.
  • You can enable Read all the information.

CM2 SP2 Setup File

How to download CM2 SP2 latest version

It helps you install the PAC or XML flash file ROM on your SpreadTrum-based device. You can download the latest version of CM2 SP2 using the Direct, G-Drive and Android File Host buttons below. Simply click on the button that you want to download.

File Name:  CM2 SP2 v2.14.zip
File Size: 48 MB
Version: v2.14 Latest
Platform: Windows (32-bit or 64-bit)

Old Version LINK: 1 LINK: 2
v2.13 AFH G Drive
v2.12 AFH G Drive
v2.11 AFH G Drive
v2.10 AFH G Drive
v2.09 AFH G Drive
v2.08 AFH G Drive
v2.07 AFH G Drive
v2.05 AFH G Drive
v2.04 AFH G Drive
v2.03 AFH G Drive
v2.02 AFH G Drive
v2.01 AFH G Drive

How to use the CM2 SP2

  1. First, you need to download and install the CM2 SP2 Tool on your computer.
  2. Then install the SPD USB driver.
  3. If you want to write firmware on your device,
    First, open the tool. Then Go to the Flash tab. Now select the stock ROM. Then connect your device to Flash Mood and click on the flash button.
  4. If you want to reset the FRP lock on your device,
    Open the CM2 SP2. Then Go to the Service tab. Now connect your device to Flash Mode, set the reset FRP, and click on Format FS.
  5. If you want to reset the Reset Screen Locks on your device,
    Open the CM2 SP2. Then Go to the Service tab. Now connect your device to Flash Mode, set the Reser Settings [Fromet FS], and click on Format FS.
  6. If you want to Read the privacy lock on your device,
    Open the tool. Then Go to the Service tab. Now connect your device to Flash Mode and click on Read Privacy.

Warning

Before flashing the device, back up your important data. Ensure your device has enough charge. If your device turns off during a flash, chances are the device is dead.

The CM2 SP2 is easy to use, but if you are an expert, it will be easier to do this work, and experts should do this work.

Notes

Virus Status: Before uploading the CM2 SP2 setup file, we checked it with Kaspersky Antivirus, so don’t worry about it.

USB Driver: If you need a USB driver, please check our latest USB Driver.

Firmware: For any Firmware, please visit the official Firmware.

More tools: If you need more tools, then download CM2 SPD and CM2 MTK.

x