The CM2 SP3 Module Tool setup file is used to flash stock ROMs on Spreadtrum SOC chipset phones. Moreover, FRP locks, screen locks, privacy locks, and invalid IMEI problems are solved with it.
On this page, you can get the latest versions of the CM2 SP3 tool setup file and all the old versions. Also, we have provided instructions on how to use it.
Features
This CM2 SP3 has a lot of features. Some key features are:
- You can perform security repairs on your device.
- Permanent lock issues can also be fixed.
- You can repair your device in Diag mode.
- Supports new devices.
- It can read software info.
- You can enable Read all the information.
How to download the latest version of CM2 SP3
It helps you install the PAC or XML flash file ROM on your SpreadTrum-based device. You can download the latest version of CM2 SP3 using the Direct and G-Drive buttons below. Simply click on the button that you want to download.
| File Name: | CM2SP3_v2.32.zip |
|---|---|
| File Size: | 20 MB |
| Version: | v2.32 Latest |
| Platform: | Windows (32-bit or 64-bit) |
| Old Version | LINK: 1 | LINK: 2 |
|---|---|---|
| v2.30 | Mega | G Drive |
| v2.29 | Mega | G Drive |
| v2.28 Beta | Mega | G Drive |
| v2.27 | Direct | G Drive |
| v2.26 | Direct | G Drive |
| v2.25 | M-Fire | G Drive |
| v2.24 | M-Fire | G Drive |
| v2.23 | M-Fire | G Drive |
| v2.22 | M-Fire | G Drive |
| v2.21 | M-Fire | G Drive |
| v2.20 | M-Fire | G Drive |
How to use the CM2 SP3
- First, you need to download and install the CM2 SP3 Tool on your computer.
- Then install the SPD USB driver.
- If you want to write firmware on your device,
First, open the tool. Then Go to the Flash tab. Now select the stock ROM. Then connect your device to Flash Mood and click on the flash button. - If you want to reset the FRP lock on your device,
Open the CM2 SP3. Then Go to the Service tab. Now connect your device to Flash Mode, set the reset FRP, and click on Format FS. - If you want to reset the Reset Screen Locks on your device,
Open the CM2 SP3. Then Go to the Service tab. Now connect your device to Flash Mode, set the Reser Settings [Fromet FS], and click on Format FS. - If you want to Read the privacy lock on your device,
Open the tool. Then Go to the Service tab. Now connect your device to Flash Mode and click on Read Privacy.
Warning
Before flashing the device, back up your important data. Ensure your device has enough charge. If your device turns off during a flash, chances are the device is dead.
The CM2 SP3 is easy to use, but if you are an expert, it will be easier to do this work, and experts should do this work.
Notes
Virus Status: Before uploading the CM2 SP3 setup file, we checked it with Kaspersky Antivirus, so don’t worry about it.
USB Driver: If you need a USB driver, please check our latest USB Driver.
Firmware: For any Firmware, please visit the official Firmware.
More tools: If you need more tools, then download CM2 SPD and CM2 MTK.
