The Avenger SPD tool is only used on SpreadTrum SOC chipsets. It helps to unlock FRP, screen lock, and network lock on any SPD chipset device. Even you can repair invalid IMEI.
On this page, you can download the latest version of the Avenger SPD setup file and also download the required older version. Also, we have provided instructions on how to use it.
Features
- You can remove the FRP.
- You can read and write RPMB.
- You can backup and restore NVRam.
- You can reset user data.
- You can repair the IMEI on your SPD device.
- Write IMEI, firmware, serial, Bluetooth, and WiFi.
- You can unlock the bootloader.
- Support all operating Windows systems.
- A user-friendly interface.
- Fast and secure data transfer.
How to download Avenger SPD Tool’s latest version.
You can download the latest version of the Avenger SPD Tool using the Mega and G-Drive buttons below. Simply click on the button that you want to download.
| File Name: | Avenger_Sprd_Installer_v2.3.1.zip |
|---|---|
| File Size: | 116 MB |
| Version: | v2.3.1 Latest |
| Platform: | Windows (32-bit or 64-bit) |
| Old Version | LINK: 1 | LINK: 2 |
|---|---|---|
| v2.3.0 | MEGA | G Drive |
| v2.2.9 | MEGA | G Drive |
| v2.2.8 | M-Fire | G Drive |
| v2.2.7 | M-Fire | G Drive |
| v2.1.5 | AFH | G Drive |
| v2.1.4 | AFH | G Drive |
| v2.1.3 | AFH | G Drive |
| v2.1.2 | AFH | G Drive |
| v2.1.1 | AFH | G Drive |
| v2.0.0 | AFH | G Drive |
| v1.9.0 | AFH | G Drive |
| v1.5.0 | AFH | G Drive |
How to use the Avenger SPD
- First, you need to download the Avenger SPD module tool on your PC.
- Then install that tool.
- Now you need to download and install the USB driver on your computer.
- If you want to write firmware on your device:
First, open the Avenger SPD Setup tool. Then go to the PAC Flasher tab. Now choose the stock ROM. Then click on Flash and connect your device to Flash Mode. - If you want the privacy lock reset on your device:
Open the tool. Then go to the Flash Mode Utils tab. Now select privacy reset. Then click on Execute and connect your device to Flash Mode. - If you want to reset the FRP lock on your device:
Open the tool. Then go to the Flash Mode Utils tab. Now select privacy reset. Then click on Execute and connect your device to Flash Mode. - If you want to reset the screen locks on your device,
First, open the tool. Then go to the Flash Mode Utils tab. Now choose Format FS. Then click on Execute and connect your device to Flash Mode.
Warning
Before flashing the device, back up your important data. Because your important data may be lost during the flash. Ensure your device has enough charge. If your device turns off during a flash, chances are the device is dead.
The Avenger SPD module setup is easy to use, but if you are an expert, it will be easier to do this work, and experts should do this work.
Notes
Virus Status: Before uploading this tool, we checked it with Kaspersky Antivirus, so don’t worry about it.
USB Driver: If you need an SPD USB driver, please check our latest SPD USB Driver.
Firmware: For any Firmware, please visit the official Firmware.
Credit: For this tool, full credit goes to the Avenger Team. They created this tool and distributed it.
More tools: If you need more tools, then download the MediaTek Bypass Tool.CM2 MTK.Avenger MTK.
